Best answer: How much fabric do I need to make a pillow cover?

A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming and an approximate 4-inch hem. One yard of 45-inch-wide fabric should be enough to make one standard case, if the material is preshrunk.

How much fabric do I need to make a 16×16 pillow?

fabric {1/2 yard is good for a 16 X 16 or smaller pillow}

What size insert goes in a 20×20 pillow cover?

Usually the larger the cover, the greater the difference between the cover and insert that’s required for a full look. Our most popular insert size is 22×22 (for use with 20×20 covers).

How many yards is a standard pillowcase?

2 yards (1.9 meters) of fabric for standard & queen size pillowcases (20″ x 30″). 2.5 yards (2.3 meters) of fabric for king size pillowcases (20″ x 40″).

How much fabric do I need for a 20×20 envelope pillow?

How much fabric do I need to make envelope pillow covers?

  1. 16″ x 16″ – cut 17″ x 38″ – 1/2 yard of fabric.
  2. 18″ x 18″ – cut 19″ x 42″ – 2/3 yards of fabric.
  3. 20″ x 20″ – cut 21″ x 46″ -3/4 yards of fabric.

What size pillow goes in 18×18 cover?

We generally recommend using inserts that are 2″ larger all around than your finished pillow size. For example if you have an 18×18 pillow cover, you’ll want to use a 20×20 insert. This will ensure that your pillow looks plump and luxurious. If the insert is too small, the pillow cover will look saggy.

IT IS INTERESTING:  What are the 15 parts of the sewing machine?

How do you measure for pillow covers?

Pillow covers are measured from seam to seam for the most accurate measurement. To measure, remove the pillow cover from insert / filler, turn the cover inside out, lay the cover on a flat surface and measure from the inside seam to seam.

How do you measure fabric for a pillow?

Measure the width of a pillow cover as from side seam to side seam, and the length as from the top seam to the bottom seam. Typically the bottom seam houses the zipper or hook-and-loop closure. Add seam allowances and cut the pillow fabric to the new measurements.

How much do you overlap envelope pillows?

Basic Instructions:

The ends will overlap approximately 3″ at the back when finished. This extra fabric is to ensure that the pillow form will be hidden when the pillow cover is in place. To calculate the fabric measurement you will need measure your pillow insert.