Frequent question: Can you use pliers to crimp beads?

While some jewelry makers will simply use a pair of chain-nosed or flat-nosed pliers and flatten the bead to close it, we prefer to use crimping pliers to secure a crimp bead because I think it gives it a more polished look. … Look at the nose of the pliers and notice how there are grooves inside of it.

Can I use regular pliers for crimp beads?

If you don’t have a pair of crimping pliers, you can use regular pliers. … To use these pliers, simply grasp the crimp bead with the flat section of the pliers and squeeze gently but tightly to smash the crimp bead flat onto the wire. Only use flat pliers or the flat section of pliers.

Do you need crimping pliers for crimp beads?

Crimp beads are soft metal beads used in place of knots to secure clasps and beads onto un-knottable stringing material such as beading wire. To use crimps, you will need some flat nose pliers to squash the crimps, or speciality crimping pliers that “fold” the bead into a small volume.

Can you crimp without a crimping tool?

If you don’t have a crimping tool, no problem! Use a pair of scissors or a utility knife to cut away a section of the sheathing at the end of the cable, untwist and arrange the small cables in the right order, put them into the RJ-45 connector, and use a small, flathead screwdriver to press down each of the pins.

IT IS INTERESTING:  How do I sew a face mask?

What can I use instead of crimp beads?

An alternative to crimp beads and crimp tubes is a newer finding called Screw-Tite Crimps™. Screw-Tite Crimps not only secure your Accu-Flex® beading wire to your clasp, they also allow you to change your clasp for a different one, should you want a different look.

Can you crimp with flat nose pliers?

A flat nose can smash a crimp, but the finish will always be different. … The smashed crimp may not conform around the wire and secure it, the crimp could slip and lead to a broken design. If you want your design to last, you must use a pair of crimping pliers.

What are crimper pliers?

Crimping Pliers are used to close 2mm-3mm crimp beads and crimp tubes smoothly and unobtrusively. Crimps are small beads or tubes used to hold wire or string ends firmly so that the design will not unravel and clasps can be attached.

What is the difference between a crimp bead and a crimp tube?

Many jewelry designers prefer crimp tubes over crimp beads. The tubes tend to be stronger than crimp beads and less likely to crack and break. Tubes may do a better job of gripping beading wire because they tend to have a larger interior surface area.

How do I know what crimp to use?

Note: It is important that you use the right size tool for your crimp tubes. For 1mm crimp tubes, we recommend the Micro Crimper. For 2mm crimp tubes, we recommend the Bead Crimper Tool. For 3mm and 4mm crimp tubes, we recommend using either the Mighty Crimper or Bent Chain Nose Pliers.

IT IS INTERESTING:  Best answer: What app is Lilo and Stitch on?

What is a swaging tool?

What are Swaging Tools? Swaging tools use pressure to expand or stretch the end of a piece of copper tubing so it can fit over another of the same diameter and make a permanent brazed connection. … Often a flaring tool kit will come with swaging bits or die blocks to convert a flaring bar into a swaging bar.