How do I sew a face mask?

How do you sew a face mask step by step?

Step-by-step instructions to make a DIY face mask:

  1. Step 1: Cut. …
  2. Step 2: Fold your fabric lengthwise and mark off a small opening. …
  3. Step 3: Sew and attach elastic No. …
  4. Step 4: Sew and attach elastic No. …
  5. Step 5: Flip your mask inside out. …
  6. Step 6: Add pleats. …
  7. Step 7: Test it out. …
  8. Step 8: Repeat for friends.

What is the best way to sew a face mask?

Instructions

  1. Cut Your Fabric. This mask can be made in a few different sizes. …
  2. Cut Your Elastic. Cut two lengths of elastic that are 7″ long no matter what size of mask you are making. …
  3. Pin the Elastic Onto the Fabric. …
  4. Get Ready to Sew. …
  5. Sew the Mask. …
  6. Turn the Fabric. …
  7. Optional: Add Pleats. …
  8. Finish the Mask.

How do you make a fitted mask?

How your mask should be worn. To get the most protection from your mask, it should be worn from the bridge of your nose to under your chin. The sides should sit flat against your cheeks with no gaps that will allow air to enter.

What is the length of elastic for face mask?

One adult mask requires two 9” x 6” pieces of tight-weave cotton and two 7” pieces of 1/4” elastic. Therefore, 1 yard of 44” wide fabric yields 12-15 masks. You need 7.5 yards of elastic for 25 masks (14” per mask).

IT IS INTERESTING:  Quick Answer: What pulls the fabric through the sewing machine?

What are the measurements of a face mask?

For Mask Size Reference: Disposable surgical masks are about 7” x 3.875” inches (not expanded) and 7” x 7” inches (expanded).

How do you attach a nose wire to an already made mask?

How to add nose wire to purchased masks

  1. Step 1: Cut and sew bias tape (or a strip of folded fabric) onto the top inside of the face mask. I sewed 4″ of bias tape on the top inside of the mask. …
  2. Step 2: Cut a piece of nose wire and insert into the casing. …
  3. Step 3: Put on the face mask and bend the wire to fit your nose.