If the bobbin thread is on top, that means the top thread is pulling more, or, has more tension. That means either the top thread is too tight or the bobbin thread is too loose.
Why am I seeing my bobbin thread on top?
In general, if you are seeing bobbin thread in your top stitching, the bobbin tension is too loose. This little screw on your bobbin housing allows you to adjust your bobbin tension.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Does bobbin thread show on top?
You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. The reason you want to use a lightweight thread is to avoid too much bulk on the back of the item.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my sewing machine making loops?
Looped stitches are usually caused by improper tension. … Looping of stitches is sometimes caused by placing the bobbin in the bobbin case the wrong way. Check your machine’s manual for directions on inserting the bobbin. There may be lint, dirt, or thread between tension discs.
What number should tension be on sewing machine?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
How often should you clean and lubricate the sewing machine?
The rule of thumb is to lubricate the machine after every three to four bobbin changes. Or clean and lubricate the hook area after each day of sewing.
What causes bird nesting in sewing?
Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, and uneven tension. This is typically caused by the tension balance being out of whack or the top thread is not threaded correctly.
What is the difference between bobbin thread and regular thread?
Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. … Another difference is that machine embroidery bobbin thread typically only comes in white.