What to Watch out for when Stitching Seams. When sewing fabrics together problems can occur when the thread tension is not correct, the needle or bobbin is not inserted properly, or the machine is not threaded correctly. … Check you have chosen the right needle size and thread to suit the fabric type and weight.
How do I fix tension in my stitches?
If the tension isn’t perfect, fix it by adjusting the bobbin spring; tighter if the bobbin thread shows on the upper layer, and looser if the needle thread shows on the underlayer. Make another test seam, and examine the stitches, repeating until the stitch is balanced.
What should the tension be on my sewing machine?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
How do you tell if your bobbin tension is off?
Swiftly pull up on the thread. The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
What are three possible causes of skipped stitches?
10 reasons for skipped stitches
- Improper threading.
- Poor clamping or insufficient pressure (flagging).
- The needle needs replacing.
- Wrong size needle.
- Wrong type of needle for the material.
- Wrong thread for the application.
- Poor quality thread.
How do you adjust thread tension?
Changing Bobbin Tension
Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension. Some quilters keep two bobbin cases on hand, leaving one as-is from the factory and using the other when they need to make adjustments.
When should I adjust the bobbin tension?
Hang the bobbin case by the thread. If the bobbin case doesn’t move at all when you jerk it the tension is too tight and you need to decrease the tension for sewing with this thread. What is this? If the bobbin case drops quickly the tension is too loose and you need to increase the tension.
What tension should I use for thin fabric?
Use size 70/10 for really thin cotton like voile, size 80/12 for light to medium weight cotton, and 90/14 for thick cotton like denim.
Why does the thread bunch up underneath?
Your Thread Tails Are Too Short
If the thread tails that come out of your bobbin are shorter than two inches, they may get sucked into your sewing machine when you begin to sew. This can cause thread bunching underneath your fabric.
Why does my thread keep pulling out of the needle?
The upper thread was not threaded correctly. The spool is not installed correctly, the spool cap is too big for the spool being used, or the thread has come out of the needle bar thread guide. Rethread ensuring that the spool is installed correctly and using a spool cap that matches your spool size.