Why is my top thread wrapping around the bobbin?

Why does my thread keeps wrapping around my bobbin?

Some of the main reasons your thread could be wrapping around the bobbin include lack of proper maintenance, causing a buildup of lint and debris, improperly threading the machine, using the wrong needle, or using a different thread weight that is not recommended.

Why is my top thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

How do I fix the tension on my bobbin thread?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

When should I adjust the bobbin tension?

Hang the bobbin case by the thread. If the bobbin case doesn’t move at all when you jerk it the tension is too tight and you need to decrease the tension for sewing with this thread. What is this? If the bobbin case drops quickly the tension is too loose and you need to increase the tension.

IT IS INTERESTING:  How do you knit a circle with 2 needles?

Why does my bottom thread keep jamming?

Make sure your bobbin thread is wound evenly on the bobbin. If the thread is wound uneven make sure the bobbin thread is through the bobbin thread winding thread guide when you start to wind your bobbin. … If the bobbin case has been inserted incorrectly into the outer rotary hook your machine will jam.

Why does my sewing machine keep bird nesting?

Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, or uneven tension. This is typically caused by the top thread not being threaded correctly or a sewing machine tension issue.

What number should the tension be on a sewing machine?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

Why is the thread loose when sewing?

If the machine is threaded wrong, not only does it make the thread breaks easier, but is also more likely to create loose stitches. Check the threading to see if the thread has passed through the entire thread guides, the take-up lever and the eye of the needle. … Check out the details of threading the machine here.