What is mock French seam?

A mock french seam has the appearance of a french seam but is a bit softer as it is hand-finished. There is less chance of it ravelling as the edges are not cut short. To make a mock french seam, place fabric right sides together and sew a 5/8″ seam allowance. Press the seam flat and then open.

What is mock seam?

The mock French seam is another easy way to create a clean finish on your seams for light to medium weight fabrics. It encases the raw edge in the same way that a French seam does, but the sewing technique is slightly different. The ‘mock’ french seam finish can be used on curves, unlike the traditional French seam.

On what type of garment might you find a mock French seam?

A French seam, which is one of the most common seams found in apparel, can be used in pants, shirts, unlined bags, and dresses. The mock French seam is used for similar purposes, but works better around curves than the French seam.

Where is mock French seam used?

A mock French seam is used when regular French seams are difficult to apply. For example, along curved seam allowance edges or as a last-minute finish where the seams have already been sewn in a conventional manner (with the face sides touching).

IT IS INTERESTING:  Quick Answer: What causes knitting to curl?

What is French seam?

noun Sewing. a seam in which the raw edges of the cloth are completely covered by sewing them together, first on the right side, then on the wrong.

What is the difference between a flat felled seam and a french seam?

A flat felled seam shows stitching on the right side (think of the seams on the side of a pair of jeans), while a french seam does not (it is found in many high end sheer garments). … Sew the two pieces of fabric, right sides together, with a 5/8″ seam.

What is a mock flat felled seam?

What Is A Mock Flat-Felled Seam? A mock flat felled seam is a faster, flatter and less bulky version of the flat-felled seam. For a mock version, you would finish one edge of your seam allowance only, and sew the two pieces together. … Trim the unfinished seam down and then – after pressing into place!

What are the 3 types of seams?

There are several different types of seams, each with its own characteristics.

  • Plain seam. A plain seam is the simplest type of seam and can be used on almost any item. …
  • Double-stitched seam. …
  • French seam. …
  • Bound seam. …
  • Flat-felled seam. …
  • Welt seam. …
  • Lapped seam.

What type of seam is used on jeans?

The looped seam is the most commonly used seam. It is used in jeans meanufacture because of its strong construction. The French seam is commonly used for rain wear, and edge stitching front facings on jackets and dresses.

Which seam is used for gathering clothes?

Description- The lapped seam is often used for joining a gathered or unfinished part to a straight or folded edge – most commonly seen in a yoke. Construction- Much like the name, this seam consists of one fabric on top that is folded down or tucked and stitched on top of a straight edge of fabric along the seam line.

IT IS INTERESTING:  What is done in tailoring?