Best answer: Where do you place the bobbin when you are going to wind it with thread?

Place the bobbin, with the holes on the top, on the bobbin winder. Put your selected thread onto the spool pin. Loop the thread around the thread guide, then pull the thread from the inside into the small hole in the top of the bobbin. Wind a bit of thread around the bobbin manually.

How do you put thread on a bobbin?

Serger Help

  1. Place spool of thread on spool pin. …
  2. Pass thread end, from inside, through the small hole in the rim of the bobbin (illustration 2).
  3. Place bobbin onto the pin. …
  4. Holding thread end, step on speed controller to run the machine until the desired amount of thread is wound. …
  5. Trim thread ends from top of the bobbin.

Why is my bobbin not winding?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

What is the purpose of the bobbin winding spindle?

The bobbin winder is a separate unit screwed on to the machine, adjacent to the balance wheel. Its function is to wind a reserve of cotton evenly onto an empty bobbin and (in most cases) spring release when the bobbin is full.

IT IS INTERESTING:  What if a piece of stitch is left in?

How do you thread the bottom bobbin?

Hold the top thread to the left and lower the needle (blue arrow) with the hand wheel on the side of the sewing machine. Raise the needle (blue arrow) with the hand wheel, and you will see the bobbin thread (red arrow) get pulled in a little. Gently pull the top thread. This will bring the bobbin thread (red arrow) up.

What moves the fabric while sewing?

PARTS OF THE SEWING MACHINE. Bobbin- holds the thread inside the machine. … Bobbin winder tension- provides tension on the thread when the bobbin winds. Feed dog- moves the fabric along as you sew.

How much thread do you put on a bobbin?

Unwind about 18″ or so of thread and bring it around the backside of the bobbin winder tension disc, wind it around the tension disc one time. Some machines might have a thread guide before this step- if yours does, don’t skip it! Be sure to place your thread through all the thread guides on your machine.