What is clipping curves in sewing?
Clipping the excess around a curve eliminates the bulk and creates a smooth outer edge while maintaining the curved shape. In garment sewing, the curve around a neckline is an inward curve. If you measure the length of the seam compared to the length of the curve, you’ll discover the seam is longer.
What does clip mean in sewing?
Before we get too far, here’s a quick definition: clipping is simply any cut into the seam allowances, resulting in a flatter seam.
How do you know if a curved seam should be clipped or notched?
When sewing a curved seam, you are supposed to be clipping or notching the seam allowance, so that the seam can stay flat and smooth. The rule is that when the seam is concave, you clip the seam allowance; when the seam is convex, you notch the seam allowance.
Why are curved seams often clipped?
Once you’ve sewn your concave seam, have a go at turning it to the right side and getting it to lie flat. It won’t. The shorter curve that is the raw edge of your seam allowance will stop you from being able to spread the seam allowance out in order to press.
Why do we clip seams?
Clipping the seam allowance during sewing refers to cutting localized notches or wedges on the inside of the seam allowance in order to release tension along curves, V-shapes and other tight areas on the garment without compromising durability and long-term wear.
How do you finish a curved seam?
Finishing curved edges
- In the instance of a concave curve where the fabric edge is shorter than the area it is folded to, the bias grainline will stretch, allowing you to manipulate the fabric. …
- Sew a baste stitch 1/8” from the fabric edge, leaving a few inches of thread at one end.
What is the difference between clipping and notching?
Notching is similar to clipping, but instead of taking a single snip out of the fabric, you cut out a small amount of fabric. Notching is used on convex curves and exterior corners because the seam allowance is larger than the space it will be turned into.
What do you do with a curved seam to make it smooth and flat?
When you sew a curved seam, reducing the bulk of the seam allowance before you turn the unit right side out is a must. Clipping the seams is the trick for making the finished outer edges of the curve smooth and flat.
What is a notched hem?
Notches are clips or wedges cut into the seam allowance in order to facilitate matching and sewing the corresponding seams during garment construction.
What is freehand cutting?
Freehand cutting is all about marking your measurements directly onto fabric, using simple tools, and developing an understanding of how clothes come together and sit on the contours of the body.