When you sew two bits of fabric together it’s common to hear the phrase, ‘right sides together’ or ‘right sides facing’. This means that the ‘right sides’ of the fabric will be touching as you sew the seam. Then once its sewn and you turn the fabric over, you don’t see the seam and it looks nice and flat.
How do you sew a right side together?
When you read, “sew right sides together” in your instructions, place the right sides (or printed/outer side) of the fabric together, line the 2 pieces of fabric up, and sew them together. If you just sewed 2 separate pieces together, you would then flip it over and see them nicely joined, with no mess.
What does right side of pattern mean?
Most patterns start on the right side. This means, that every odd-numbered row you knit is the right side, and every even-numbered row means knitting the wrong side. … Some patterns are reversible but the pattern rows (the ones with the more difficult stitches) are only on the right side.
Do you cut fabric right sides together?
Fabric is usually folded right sides together for cutting. The only time it is cut right side out is if it has a design that must be taken into account and that does not show through to the wrong side. Fold the fabric as shown in the cutting layout on the pattern guide sheet.
Do you pin pattern to right or wrong side of fabric?
When you are cutting two layers of fabric, the pattern pieces do not have to be placed printed side up. If you are cutting one layer, however, the pattern pieces must be placed printed side up. They must also be placed on the right side of the fabric.
Which side of the fabric is the wrong side?
You usually sew things with right sides together so the stitching will be on the inside of the finished project. Wrong side: The other surface is the “wrong” side of the fabric. The fabric design is sometimes visible on the wrong side of the fabric, but it will be more faded than on the right side.
Why are some fabrics folded with right side in and some with it out?
Typically, the fabric store always wants to show off the best side of the fabric when it’s on display. Was the fabric just wrapped on a bolt or was it also draped over the top? If it was simply wrapped around a bolt, that means when the fabric was folded in half, it was folded so that the right side was on the outside.
Do you cast off on the right or wrong side?
I prefer Casting Off on the Right Side of my work, which is the front side. … You usually end a pattern after knitting the wrong side, or backside, so I’m going to start our Cast Off row on the right side.
What is the right side of the fabric called?
The face of fabric, also known as the right side, is the side of a fabric that is meant to be seen. The face is what you see on the outside of the garment when it is finished; the other side, the wrong side, is hidden.
How do you tell right from wrong side of linen?
If the fabric curls to one side then that is the right side of linen. There is a bit of good news here. Linen is one of those fabrics where you can get away with using either side. So if you cannot tell which is the right or wrong side, pick one and stick with it.
What side of the fabric where the pattern should be laid?
Tell you what direction your pattern piece should be placed on your fabric. Your grain line is always parallel to the selvage. If your pattern piece should be lay lengthwise, crosswise or on the bias, the grainline will tell you (as well as the layout guide).
What side do you cut fabric on?
Tip: If the fabric has a raised surface like velvet, corduroy or a synthetic fur type fabric, always cut from top to bottom going with the direction of the nap or furry surface. If you pass your hand over the fabric and it stays flat and smooth this is the correct direction of the warp.