Your question: How wide should a top stitch be?

It is important to start with a clear plan. Draw or print a technical illustration of the garment you are sewing. Take note of where you would like to topstitch and at what width. Topstitching is typically 1/4” away from the seam, but you can play with different proportions.

What width is top stitch?

TIP #1: Topstitching Width

  • SINGLE TOPSTITCHING: For the most part my single row of topstitching is approximately 2-3mm (1/8”) from the seam/edge. …
  • DOUBLE TOPSTITCHING: My 2nd row, when double topstitching, is then approximately 5-6mm (1/4”) from the first row.

What is the average stitch width?

The range is typically from size 0 to 5mm on most sewing machines but can be wider. The stitch width determines how far the stitch will go from side to side. Below are stitch width comparisons for zigzag stitches (the stitch length was set at 2.5mm).

What is the best stitch width for sewing a straight stitch?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

IT IS INTERESTING:  How are tiny beads made?

What size is top stitch thread?

30m spools, 100% polyester. Recommended needle and size: Universal, size 100 – 120. Best results are achieved with machine sewing using Top Stitch in the needle and Sew-All Thread in the bobbin.

How do you sew a perfect top stitch?

8 steps to successful topstitching

  1. Have a good sewing machine. …
  2. Use heavier or double thread in the needle. …
  3. Use the right presser foot. …
  4. Use regular thread in the bobbin. …
  5. Increase the stitch length. …
  6. Use needles with a larger eye. …
  7. Experiment with the needle tension.

What should my stitch tension be?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. … It may show at the sides of the stitch and the fabric is slightly raised or bunched. If you see this, slacken off the tension slightly (perhaps to between 3 and 4).

What tension should I use for thin fabric?

Use size 70/10 for really thin cotton like voile, size 80/12 for light to medium weight cotton, and 90/14 for thick cotton like denim.

What settings should sewing machine be on?

Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range.

Why does my top stitch look like a straight line?

Check that the machine is threaded correctly.

If the bobbin thread was incorrectly threaded, the upper thread may be too tight. … The lower thread appears as a straight line on the lower side of the fabric. The stitching on the lower side of the fabric is loose or has slack.

IT IS INTERESTING:  Frequent question: What is the first line in Lilo and Stitch?

What should my straight stitch look like?

Straight Stitch

When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy.

What does correct tension look like?

A correct thread tension looks smooth and flat on both sides of the seam. The needle and bobbin threads interlock midway between the surfaces of the material.

Do you put topstitch thread in the bobbin?

When working with top stitching thread always use all purpose thread in your bobbin. 2) Working with topstitching thread may require you to change the tension setting on your machine. Low tension settings will result in loose stitching on the wrong side of your fabric.

Do you use top stitching thread in the bobbin?

Use topstitch thread as your spool only (on top of your machine), with regular thread that matches your fabric in the bobbin. Lengthen the stitches to 3 or 3.5mm to create a straighter-looking line. Press well before topstitching to flatten out the seams.

What weight is standard sewing thread?

Your standard thread will often come in a medium 40 or 50 weight. But a huge variety of other threads exist in super fine 100 weight, or super chunky 3 weight options too.