Question: How do you put thread in an Overlock Machine?

How do you thread an old Overlocker?

How to Thread an Overlocker / Serger

  1. Step 1: Open the machine. …
  2. Step 2: Raise the presser foot. …
  3. Step 3: Remove the presser foot and lower the knife. …
  4. Step 4: Raise the needles to the highest position. …
  5. Step 5: Pull up the retractable thread stand fully. …
  6. Step 6: Place thread into pre-tension guide at the top of the machine.

What does a 4 thread Overlocker do?

A 4-thread overlock stitch is sewn with two needle threads which essentially sews two rows of stitching in your fabric while the looper threads wrap the edge. This stitch is best used on medium to heavy weight fabrics or on seams that see a bit of stress, such as on fitted garments.

What does a 5 thread Overlocker do?

Five thread overlock machine is used to hem the raw edges of the fabric, this ensures the prevention of loosing threads from the edges. The five thread overlock machine is superior over the three thread overlock machine, because it has two needles and two loopers for secure stitch.

What is the upper thread tension?

By thread tension, we mean the amount of thread that can pass through the machine to create the stitch. … Top thread tension is controlled by a dial on the machine’s thread path. So make sure the thread sits correctly between the tension discs when you’re threading your machine.

IT IS INTERESTING:  How do you crochet a Graphghan?

Are Sergers hard to thread?

They are not hard to thread at all!” Now that you have a serger there are a few guidelines that can help you and your serger have a peaceful sewing experience together. I have narrowed the “taming of a serger” down to four MUSTS.