Where should the thread be when you start sewing?

Insert the thread into the small hole at the bottom of the needle from front to back by hand or use automatic needle threader if your sewing machine has one. Then the thread must be drawn under the presser foot, located directly under the needle. VERY IMPORTANT: the power switch should be off.

Where should the thread from the bobbin comes out?

Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop. Pull out about 15 cm (6″) of both threads and place them toward the back of the machine straight behind the presser foot. The upper thread should pass between the toes of the presser foot.

What is the order of threading the upper part of sewing machine?

To set up the upper thread for your machine, first place a spool of thread on your machine’s thread pin (also called a spool pin or spool holder). Thread through the thread guide. Pull the thread to the left of your machine and thread it through the thread guide. Pull the thread through the U-shaped guide.

Why do we need to thread the machine correctly?

THREADING THE MACHINE

Each part of the threading mechanism on the head of a sewing machine has a definite purpose in guiding the thread from the spool to the needle. The thread must pass through the various guides in a given order so that the machine will sew properly the formed stitches.

IT IS INTERESTING:  What stitch type is most frequently used in apparel industry?

Why is my needle not catching the bobbin thread?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

Do you put the bobbin thread through the needle?

Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.